Product Overview
UHMWPE raw material is a linear polyethylene with a molecular weight exceeding 4.5 x 10^6 g/mol, supplied in white free-flowing powder form. It bridges the gap between engineering plastics and high-performance thermoplastics by combining an ultra-high molecular weight with a low coefficient of friction.
Unlike standard HDPE (High-Density Polyethylene), this ultra-high molecular weight delivers exceptional impact strength, low wear rates, and chemical resistance. Processed primarily via ram extrusion, compression molding, and gel spinning, it serves as the base polymer for demanding industrial wear components.
-
UHMWPE Yarn Industry SolutionsAs a premier source factory of UHMWPE, TOWEX provides tailored UHMWPE yarn solutions across five core industrial sectors. Each industry requires a specific balance of denier, tenacity, and processingread more
-
UHMWPE Denier Specifications FromAs a professional source factory for UHMWPE fiber, TOWEX produces a comprehensive range of deniers to serve diverse industries. Understanding the correlation between Denier (D) and its intendedread more
-
UHMWPE YarnIn the high-performance fiber industry, color is more than an aesthetic choice, it is a functional specification. At TOWEX , our colored UHMWPE (Ultra-High Molecular Weight Polyethylene) yarns areread more
-
UHMWPE Twisting and Covering SolutionsAt TOWEX , we believe that the raw fiber is only the beginning.We use our own high-tenacity yarns to weave our Ultra Fabrics to meet the rigorous demands of downstream weaving, knitting, and roperead more
-
UHMWPE Knitted FabricUHMWPE knitted fabrics represent the next generation of high-performance textiles. By combining the extreme tenacity of UHMWPE fibers with the flexibility of modern knitting structures, TOWEXread more
-
UHMWPE Woven FabricUnlike traditional knits, UHMWPE Woven Fabrics provide the ultimate dimensional stability, extreme tear strength, and low elongation required for structural safety and rugged utility. At TOWEX , weread more

High Molecular Weight (4.5 -- 9.0 x 10^6 g/mol): Prevents chain disentanglement under high shear and mechanical stress.
Low Coefficient of Friction (0.10 -- 0.22): Resists abrasive wear and reduces energy consumption in sliding contact applications.
Impact Resistance: Maintains structural integrity under repeated high-load impacts down to cryogenic temperatures (-269°C).
Chemical Inertness: Resists most acids, alkalis, and organic solvents; non-wetting surface prevents material buildup.
Technical Specifications
|
Property |
Test Method |
Typical Value |
Unit |
|
Average Molecular Weight |
Viscosity Measurement |
4.5 -- 9.0 |
x 10^6 g/mol |
|
Density |
ISO 1183 |
0.930 -- 0.935 |
g/cm³ |
|
Bulk Density |
ISO 60 |
0.40 -- 0.45 |
g/cm³ |
|
Particle Size (D50) |
Laser Diffraction |
120 -- 220 |
μm |
|
Tensile Strength at Yield |
ISO 527 |
>= 21 |
MPa |
|
Tensile Strength at Break |
ISO 527 |
>= 40 |
MPa |
|
Elongation at Break |
ISO 527 |
>= 350 |
% |
|
Charpy Impact Strength (Notched) |
ISO 179 |
>= 120 |
kJ/m² |
|
Shore Hardness |
ISO 868 |
63 -- 68 |
Shore D |
|
Melting Point |
ISO 11357 |
130 -- 136 |
°C |
Material Composition
Base Polymer
100% Virgin Ultra-High Molecular Weight Polyethylene homopolymer.
Additives
Unfilled standard grades contain zero processing aids or fillers. Lubricated, anti-static, or UV-stabilized custom masterbatches are available upon request.
Contaminant Control
Processed in closed-loop polymerization reactors with strict particle filtration to eliminate metallic and foreign polymer impurities.
Applications
Extruded Profiles
Conveyor guide rails, wear strips, cable channels, and ski base plates.
Compression Molded Blocks
Large sheets, crane outrigger pads, marine fender facings, and structural machined components.
Sintered Tubes & Rods
Mechanical bushings, bearings, valve seats, and scraper blades.
Specialty Uses
Battery separators, filtration membranes, and orthopedic implant blanks.
Molecular Weight Tailoring: Production runs adjustable between 3.0 x 10^6 and 9.0 x 10^6 g/mol based on processing parameters (ram extrusion vs. compression molding).
Particle Size Grading: Fine-powder fractions for specialized sintering or coarse fractions for bulk powder flow.
Functional Additives
Anti-Static: Carbon black or permanent antistatic agents for explosion-hazard environments.
Lubricated: Silicone or wax-modified grades for lower static friction coefficients.
UV-Stabilized: Carbon black compounding for outdoor and marine applications.
Need a custom molecular weight or bespoke filler? Consult our polymer lab.

Quality Control
Manufacturing Capacity: Backed by an annual production capacity of 15,000 metric tons across automated polymerization lines.
Laboratory Testing: Equipped with Ubbelohde viscometers, laser particle size analyzers, and melt flow indexers to verify every production lot.
Batch Testing: Every production lot undergoes rigorous laboratory verification for molecular weight, bulk density, and particle size distribution.
Impediment Inspection: Automated optical sorting systems monitor resin powder streams to reject black specks and cross-contamination.
Documentation: Each shipment includes an official Certificate of Analysis (CoA) conforming to ISO 9001 quality management standards.
Sample Archiving: Reference samples from every production batch are retained in climate-controlled storage for 24 months.
Packaging & Shipping
Packaging Formats
- 25 kg multi-layer paper-plastic composite bags with moisture-barrier inner liners.
- 500 kg or 1000 kg heavy-duty polypropylene FIBC bulk bags (jumbo bags).
Palletization: Fumigation-free wooden pallets, shrink-wrapped and corner-protected for international container shipping.
Storage Recommendations: Store in dry, well-ventilated indoor spaces below 40°C, protected from direct sunlight and static discharge sources.

Request for Quotation
To generate an accurate technical quotation and freight estimate, please provide the following details in your inquiry:
Grade Requirement: Standard extrusion, compression molding, or specific additive grade.
Target Molecular Weight / Melt Index Specs: If applicable.
Order Volume: Metric tons per shipment / Annual consumption.
Destination Port / Delivery Address
Required Documentation: TDS, CoA, FDA/EU food contact declarations.
Jiaxing Towex New Materials Co., Ltd. is one of the most experienced UHMWPE raw materials manufacturers and suppliers in China, also supports customized service with low price. Please feel free to buy bulk high quality UHMWPE raw materials in stock here from our factory. Contact us for quotation.
